Quote:
Originally Posted by thedrewski86
Re the throttle/choke: I've developed an odd warm up procedure to eliminate cable bind. I start the bike on full choke on the center stand, back off the choke gradually and immediately while tipping the bike off the front wheel. With the front wheel up, I turn the bars right and left. This inevitably loosenes the choke cable and drops it down a bit.
That may help you locate the problem.
|
It was two points it would bind a bit which was the carb the part that slides left and right and the cable itself. Turning the handlebar didn’t have any effect.
It’s so much better to have much finer control over the choke lol