ninjette.org - View Single Post - Start Up / Idle Issue After Driven Block Off Plate Install

DannoXYZ · September 4th, 2018, 10:03 AM

You're most welcome! Here are some links to Mega/Microsquirt forums with great tech and tuning info:

https://www.diyautotune.com/support
http://www.megamanual.com/forums.htm
http://www.msextra.com/forums

For wideband O2-sensor, I recommend digital unit with on-board datalogging (no laptop required). I suggest no display gauge for safety. Capture all data while staying safe with your eyes on road. Then take logs back to cave for analysis. Logs also much more accurate than trying to eyeball gauge.

September 4th, 2018, 10:03 AM	#10
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	You're most welcome! Here are some links to Mega/Microsquirt forums with great tech and tuning info: https://www.diyautotune.com/support http://www.megamanual.com/forums.htm http://www.msextra.com/forums For wideband O2-sensor, I recommend digital unit with on-board datalogging (no laptop required). I suggest no display gauge for safety. Capture all data while staying safe with your eyes on road. Then take logs back to cave for analysis. Logs also much more accurate than trying to eyeball gauge.