ninjette.org - View Single Post

Brau110 · September 12th, 2021, 08:08 AM

I have a 2013 Ninja 300. Did a top end install as I had lost compression. Put it back together and it now starts but it takes a little bit to start. Then once it starts it won’t idle unless you hold the throttle and it runs a little rough. No ticking just doesn’t run smooth or idle. Now it won’t rev past 1000rpm with throttle usage. Any ideas?

September 12th, 2021, 08:08 AM	#1
Brau110 ninjette.org newbie Name: Brandon Location: Sioux Falls Join Date: Sep 2021 Motorcycle(s): Kawasaki 650, 300 Posts: 1	Ninja 300 Rough idle I have a 2013 Ninja 300. Did a top end install as I had lost compression. Put it back together and it now starts but it takes a little bit to start. Then once it starts it won’t idle unless you hold the throttle and it runs a little rough. No ticking just doesn’t run smooth or idle. Now it won’t rev past 1000rpm with throttle usage. Any ideas?