ninjette.org - View Single Post - DIY: Lowering the front end. Raising the Forks

kkim · November 23rd, 2008, 09:56 AM

Thanks, Z.

Just thought I would add...

Torque values-

Handlebar allen mounting bolts- 18 ft/lbs

Front fork clamp bolts hex head (upper)- 15 ft/lbs

Front fork clamp bolts allen head (lower)- 22 ft/lbs

November 23rd, 2008, 09:56 AM	#2
kkim Join Date: Nov 2008 Posts: Too much.	Thanks, Z. Just thought I would add... Torque values- Handlebar allen mounting bolts- 18 ft/lbs Front fork clamp bolts hex head (upper)- 15 ft/lbs Front fork clamp bolts allen head (lower)- 22 ft/lbs