ninjette.org - View Single Post

gokartmozart · October 7th, 2018, 06:54 AM

definitely not carbs, - ultrasonic cleaned 3 times. gray wire is at ign switch (needs to be switched on)? BK/Y on igniter--- OK to frame ground ? where should white and brown on reg/rec be connected? G/BK on igniter, (safety switches) OK to frame ground? BR/BK on igniter, 10A fused from ig sw? not sure if my wiring is causing some sort of interference to make ignition intermittent

October 7th, 2018, 06:54 AM	#19
gokartmozart gokartmozart Name: randy Location: land of corrupt govt-illinois Join Date: Nov 2015 Motorcycle(s): 250 ninja ,it's realy a ninja motor on a scratch built alum chassis (avatar is my old kart) Posts: 22	100 definitely not carbs, - ultrasonic cleaned 3 times. gray wire is at ign switch (needs to be switched on)? BK/Y on igniter--- OK to frame ground ? where should white and brown on reg/rec be connected? G/BK on igniter, (safety switches) OK to frame ground? BR/BK on igniter, 10A fused from ig sw? not sure if my wiring is causing some sort of interference to make ignition intermittent __________________________________________________ Will legalized marijuana remove roadrash scars ?