Here's everything I'm getting with the engine,
Every single sensor is there with the wiring narness.
Comes with:
Engine
Air box
ECU
display/cluster
Exhaust
Brake master cylinder
Brake caliper
Radiator and it's piping
Wiring harness
I'm probably forgetting some stuff.
Cooling it shouldn't be an issue, and I think I have to do some grinding on one of the mounts.
Fuel is gonna be the tricky one, the fuel pump, level sensor in all one unit, and mounts inside the tank, I figured I'd go with an external pump.
Wiring should be interesting, but knowing Kawasaki, it should be to far off.
I'm excited about taking this project on, and can't wait to see it done.
All else fails, I'll just use the carbs, and change out the flywheel and side cover.
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|