Quote:
Originally Posted by Asspire
ok try this: turn key to on position, leave kill switch on run, but don't start engine. is there power at red wire? if yes, jump Grey wire to blu/yellow wire, lights come on? if yes, leave it jumped and check for power at red wire, is there voltage? if yes, remove jump wire from relay, is the lights still on? if no, is there power at red wire?
|
1.)with key on run and engine off there is .2 v power at red wire.
2.)if I jump the yellow blue and gray wire together with the bike on the headlights do come on. After jumping yelllow blue and gray and with headlights on the red wire gets 10.8v - i get the same 10.8 voltage if the jump is removed (lights do stay on) as well if I keep the jump touching the blue yellow and grey wires.
seems like I'm not getting that much power from the red wires until the blue yellow and grey wires are jumped. Where do the red powers come from?