ninjette.org - View Single Post

DannoXYZ · July 3rd, 2020, 08:53 AM

Some possibilities:

1. on new-gen, it's possible to install front sprocket backwards. Which side is step/spacer on sprocket facing?

2. only one rear axle spacer per side. Don't know if it's possible to get them backwards. Brake rotor won't fit into caliper.

3. wrong wheel spacer on left? Got mixed up with something else?

4. worn wheel bearing?

5. worn output-shaft bearing?

6. carefully inspect chain's path with bright light. Is there something rubbing on chain? Inside sprocket cover?

July 3rd, 2020, 08:53 AM	#10
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	Some possibilities: 1. on new-gen, it's possible to install front sprocket backwards. Which side is step/spacer on sprocket facing? 2. only one rear axle spacer per side. Don't know if it's possible to get them backwards. Brake rotor won't fit into caliper. 3. wrong wheel spacer on left? Got mixed up with something else? 4. worn wheel bearing? 5. worn output-shaft bearing? 6. carefully inspect chain's path with bright light. Is there something rubbing on chain? Inside sprocket cover? Last futzed with by DannoXYZ; July 5th, 2020 at 11:11 AM.