Quote:
Originally Posted by toEleven
Safety wire is used to maintain tension in the direction that tightens a part that might otherwise work its way loose. In this case, my oil filter which was freshly switched to a K&N version. If you peruse some race org rules you'll find an assortment of other bits that require it. There's also like a very serious aviation industry spec for how it should be done, if you're into dry technical documents.
It also means 'spend a few minutes trying to get a picture of my oil filter without removing more bodywork + with poor lighting'
|
Nice, but Pregen is a bit different, you'd have to do that to the oil filter bolt.
Also racers do this, sometimes due to the racing rules depending on association, and/or track.
I had the specialty tool years ago that made safety wiring easier.