Clutch not engaging
Hi guys thanks for letting me join. I have been lurking for a little. I have an issue with my clutch. I was riding home last night and after shifting up the lever just went limp. I tightened the cable up some and it seemed like the problem was corrected. I went on a test run today, once I get to about 3rd gear the same thing happens. If I pumped the lever it would slowly tighten up but not engage. I completely removed the cable and the arm on the engine case just wiggles back and forth. There is no resistance at any point in rotation. What is going on and what do I need to do to fix this issue. Thanks in advance.
|