ninjette.org - View Single Post - Help with rear stand (In response to " rear stand good deal ")

Alex · February 17th, 2009, 08:20 PM

You can get spools just about anywhere (any motorcycle shop, brick & mortar or online). Most Kawasakis, including our Ninjette, use standard 10mm spools. That means the screw itself is 10mm. Some versions fit a little better than others depending on the shape of the lip, but many come with optional spacers to put them out a couple mm anyway. That way they won't rub up against the swingarm itself.

February 17th, 2009, 08:20 PM	#3
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	You can get spools just about anywhere (any motorcycle shop, brick & mortar or online). Most Kawasakis, including our Ninjette, use standard 10mm spools. That means the screw itself is 10mm. Some versions fit a little better than others depending on the shape of the lip, but many come with optional spacers to put them out a couple mm anyway. That way they won't rub up against the swingarm itself. __________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)