ninjette.org - View Single Post - Cam Chain replacement, possible engine damage

n4mwd · April 4th, 2014, 03:44 AM

Just the new sleeves alone are $75 each. Don't know about others, but my machine shop has a $50 minimum charge. So that's $200 minimum to go that route.

Boring to 0.5 mm oversize is a little cheaper. New o/s pistons are $30 each.

In all cases, you'll need new rings which are also about $30 each set. I can say that because if your cylinders are worn out, so are your rings.

April 4th, 2014, 03:44 AM	#92
n4mwd ninjette.org certified postwhore Name: D Location: Palm Beach, FL Join Date: Oct 2010 Motorcycle(s): 2006 Ninja 250R, 2007 EFI Ninja 250R Posts: A lot. Blog Entries: 1	Just the new sleeves alone are $75 each. Don't know about others, but my machine shop has a $50 minimum charge. So that's $200 minimum to go that route. Boring to 0.5 mm oversize is a little cheaper. New o/s pistons are $30 each. In all cases, you'll need new rings which are also about $30 each set. I can say that because if your cylinders are worn out, so are your rings. __________________________________________________ My Ninja Blog Proud member of ABATE.My NYC Road Rage documentary - CENSORED!