ninjette.org - View Single Post

jonb08 · March 17th, 2009, 08:24 PM

Excellent point as usual. I reset my mixture screws to default which is 2.5 turns out from all the way in. When I warmed up the bike, it idled correctly at first and then after some riding i got floating rpms at around 2k. I was able to correct this by just actually lowering the idle speed with the speed adjustment knob and the issue went away. I can blip the throttle after being fully warmed and there is no floating.

Maybe I should turn the idle speed knob back to where it was (there is some play where turning a half turn or so will not affect idle), take it for a spin, then the rpms should hang again. At this point I can lean it out with the mixture screws until hanging stops... What do you think? I've got time to do this tomorrow.

March 17th, 2009, 08:24 PM	#23
jonb08 ninjette.org member Name: Jon Location: Long Island, NY Join Date: Mar 2009 Motorcycle(s): 2007 EX250 Posts: 91	Excellent point as usual. I reset my mixture screws to default which is 2.5 turns out from all the way in. When I warmed up the bike, it idled correctly at first and then after some riding i got floating rpms at around 2k. I was able to correct this by just actually lowering the idle speed with the speed adjustment knob and the issue went away. I can blip the throttle after being fully warmed and there is no floating. Maybe I should turn the idle speed knob back to where it was (there is some play where turning a half turn or so will not affect idle), take it for a spin, then the rpms should hang again. At this point I can lean it out with the mixture screws until hanging stops... What do you think? I've got time to do this tomorrow.