View Single Post
Old February 20th, 2018, 10:14 AM   #1
1ER6F
#41 Noriyuki Haga
 
1ER6F's Avatar
 
Name: 1ER6F
Location: AZ
Join Date: Oct 2012

Motorcycle(s): '10 250r Track Bike

Posts: 90
FS in AZ - 2010 Ninja 250r Trackbike w/ Lots of Goodies! Plus Street Fairings

I'm hanging up the gloves and the bike is for sale.

Price Dropped to $2,700 - Located in Tucson, AZ
2010 Ninja 250r SE Trackbike / Streetbike
This bike is DIALED in!

8,600 miles. Clean title, No liens, No salvage history.
Does NOT leak oil or coolant. Does NOT burn oil. Fork seals do NOT leak.
It runs like it is brand new, doesn't make any unusual engine noises etc.
Second owner. Most stock parts included. Bike has been meticulously cared for.
Recommended 8k mile valve adjustment performed by Evan Steel Performance at
a cost of 300 Dollars. Bike was fully inspected and needs nothing.


***Upgrades Include***
RaceTech gold valve emulators with machined fork inserts,
(Rays fork oil formulated to 20 weight)
Sonic Springs .70 with aluminum machined pre-load spacers
06-09 GSXR machined rear shock with 2006 GSXR 8.1 rear spring,
(will include 9.4 rear spring and machined aluminum dogbones for tuning for heavier riders and correct geometry)
AreaP full exhaust system with muffler crash protection and removable quiet insert
Stage 3 Dynojet kit - tuned to perfection
New K&N pod air filter installed
Woodcraft clip-ons
ACV adjustable brake and clutch levers
Stock 250r bar end weights outfitted for clip-ons
Short throw throttle
Spiegler front braided stainless steel brake line with NEW brake pads
TechSpec custom tank grip pads
SprocketLite lightweight steel rear 42t sprocket
Yoshimiro foot peg risers, 43mm back and 20mm up or 43mm back and 35mm up
Yoshimiro folding slim race foot pegs
NEW Bridgestone BT003RS Tires - 110Front/140Rear
Rear spools
Kleen charcoal air system removed, equiped with stainless steel mini filter
Fiberglass race fairings with color matched kawasaki green paint,
fairings have been cut to accommodate aggressive fitted clip-ons
(will include race tail and additional front fender)
Custom brackets made to house stock gauge cluster to fit street and track fairings
Shaved kickstand mount
Suspension parts machined by professional machine shop for accuracy

The track and street fairings have been designed to be interchangeable.
The fairings can be swapped out with 8 bolts.

Please respond to the thread if interested AND send a PM.
Thanks for looking!!!

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]





[IMG][/IMG]

Last futzed with by 1ER6F; April 5th, 2018 at 06:36 PM. Reason: Lowered asking price
1ER6F is offline   Reply With Quote