ninjette.org - View Single Post

JFMNINJA400 · September 12th, 2020, 06:36 PM

I opened up the gauge cluster and found corrosion from WATER 💦 on the circuit board. So the crack was leaking and it looks like water pooled there for awhile and shorted out the gauge cluster. I see this is a common issue with the 300 once water gets inside the gauge cluster. I ordered a new and will know for sure as soon as I plug it in. You have to take both side plastics and the nose piece to access the gauge cluster. What a royal pain in the arse along with the 100 screws you have to take out.

. The bike will be in pieces until the gauge cluster arrives.

September 12th, 2020, 06:36 PM	#11
JFMNINJA400 ninjette.org member Name: John Location: New Windsor Join Date: Nov 2019 Motorcycle(s): GSXR 750, GSXR 600, Ninja 400, Ninja 300 Posts: 146	I opened up the gauge cluster and found corrosion from WATER 💦 on the circuit board. So the crack was leaking and it looks like water pooled there for awhile and shorted out the gauge cluster. I see this is a common issue with the 300 once water gets inside the gauge cluster. I ordered a new and will know for sure as soon as I plug it in. You have to take both side plastics and the nose piece to access the gauge cluster. What a royal pain in the arse along with the 100 screws you have to take out.. The bike will be in pieces until the gauge cluster arrives.