Quote:
Originally Posted by p1noysta
So i have been trying to adjust my screws and i was trying to use the alternate method and turning it down but i turn my screws down all the way and the rpm doesnt drop. When i Turn them all the way down is that the stock setting?
I turned them down all the way and turned the left one at 2.5 turns out and the rght 1.75 out and im still getting it rich. Like the rpm dips when i blip it. it doesnt do it if the screws are closer to being turned all the way.
|
You might want to PM or contact some of the gurus here about that - kkim or Vex come to mind. Good luck bud!