ninjette.org - View Single Post

CZroe · October 10th, 2022, 08:25 AM

Yeah, you can’t really swap the master cylinder out without introducing air so the brakes probably just need a bleeding. Hope the valve isn’t too big an issue. The speedometer is completely mechanical with no electronics so is it possible that your cable is not connected? It should go from the speed sender gear at the left side of the front wheel axle to the back of the gauge cluster.

October 10th, 2022, 08:25 AM	#50
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Yeah, you can’t really swap the master cylinder out without introducing air so the brakes probably just need a bleeding. Hope the valve isn’t too big an issue. The speedometer is completely mechanical with no electronics so is it possible that your cable is not connected? It should go from the speed sender gear at the left side of the front wheel axle to the back of the gauge cluster.