ninjette.org - View Single Post

kkim · April 5th, 2009, 05:26 PM

to keep the signals from drooping, you need to use some sort of "washer" between the signal grommet and the frame. I used a couple of small tie wraps to act as washers in there to get the signals to stick straight out.

April 5th, 2009, 05:26 PM	#152
kkim Join Date: Nov 2008 Posts: Too much.	to keep the signals from drooping, you need to use some sort of "washer" between the signal grommet and the frame. I used a couple of small tie wraps to act as washers in there to get the signals to stick straight out.