Quote:
Originally Posted by DannoXYZ
Just gently bend it back with some big channel-lok pliers.
If you're feeling lucky, hammer in single blow!  |
Danny thanks. It wasn’t exactly easy but I got it into about as straight as I think it’ll go. So far so good.
Now, progress is being made. So much in fact that I went ahead and got things put together enough to try and do a test start!
https://photos.app.goo.gl/HUvsrYHkhpaBPhzb7
SO CLOSE!!!!
Any ideas?
Friend of mine says to just go ahead and replace the ignition coils as I tried seeing if an old plug would arc during start but wasn’t getting anything.
I’m finding this bike is more Frankenstein than I originally believed to be so. There’s so many mismatched nuts and bolts I dunno what the hell is going on. Having to order lots of correct replacements simply because I do NOT trust what’s on there.