ninjette.org - View Single Post - How expensive would it be to get a brake caliper piston custom machined?

DannoXYZ · September 26th, 2019, 09:37 PM

I haven't had any issues with used-parts off eBay. Look at photos very carefully. Read the description very carefully. Look at seller-ratings very carefully.

One and only problem I had was non-delivery of wheel. Turned out UPS f*cked up and delivered it to identical street-address, but 2-blocks from their distribution-centre in wrong town. I was actually 25-miles away. Probably stoned yutes relying way too much on GPS.

September 26th, 2019, 09:37 PM	#8
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	I haven't had any issues with used-parts off eBay. Look at photos very carefully. Read the description very carefully. Look at seller-ratings very carefully. One and only problem I had was non-delivery of wheel. Turned out UPS f*cked up and delivered it to identical street-address, but 2-blocks from their distribution-centre in wrong town. I was actually 25-miles away. Probably stoned yutes relying way too much on GPS.