Quote:
Originally Posted by EthioKnight
FVCK FVCK FVCKITY FVVVVCK!!!!!!!
Sorry had to get that off my chest...effin' mad that I have to be the first to mess up the install!
Ok, I was tightening my oil temp sensor to the bolt (with threadlocker applied) when this happened!!!
|
It's a pipe thread which means that it's self-sealing due to a tapered shaft or compression threads. Either way, it isn't meant to thread all the way in. I would not use threadlocker anywhere inside the engine or it's oil. I would bolt it in as far as it goes and then apply high temp RTV liquid gasket sealant to the exposed threads outside. Use the red stuff to match your bike.
If you're going to order the Koso part, at least gove that business to Jordan and Evan from RaceTechElectric.
Otherwise, it seems to be a standard 1/8" MPT/NPT temp sensor/sender:
http://www.ebay.com/sch/i.html?_nkw=...md=1&_ftrt=901
http://www.ebay.com/sch/i.html?_nkw=...md=1&_ftrt=901