Thread: engine swap
View Single Post
Old July 28th, 2013, 08:29 PM   #2
alex.s
wat
 
alex.s's Avatar
 
Name: wat
Location: tustin/long beach
Join Date: Sep 2009

Motorcycle(s): wat

Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
the carbs can stay in which means throttle and choke cables can stay.

the lower clutch attachment has two 12mm nuts. unscrew the top one, then the bottom one all the way, then screw in the screw at the clutch handlebar perch and remove the top end of the cable out of the handlebar then you will have play at the bottom on the engine so rotate the arm thing its mounted to counter clockwise until you can pull it up and out
__________________________________________________
alex.s is offline   Reply With Quote