Quote:
Originally Posted by islanderman7
It's kinda hard to see but on the needle is it: e-clip, washer, washer, then e-clip?
|
yes, that's what I have. Read your instructions that came with the kit... they recommend you put the washers in.
in this pic, you can see the clip clearly on the 3rd (middle ) notch.
in this pic, the clip in the 3rd with 2 washers above the clip and I added another clip above the washers to keep everything from running away or falling off. All that
really matters is the clip in the 3rd notch. The 2 washers and other clip are there to stabilize the needle in the carb to keep it from dancing around.
Here are the FP needles with clips and washers alongside the stock needles.