ninjette.org - View Single Post - FI and gas lights blinking and gas dies when decelerating.

Filipposk93 · June 21st, 2019, 12:27 AM

Good morning DannoXYZ.
It dies completely only if the RPMs are low enough. Otherwise its only the gas that becomes unresponsive. The bike does not get any error codes at all. It is both lights flashing (FI and gas), therefore no errors are present, I have plugged it on a laptop. All the recent service jobs were mentioned in my first post.

Also, forgot to mention, idle does fluctuate slightly (1300 - 1600) whether the bike is warm or cold. The air filter was replaced as well.

June 21st, 2019, 12:27 AM	#5
Filipposk93 ninjette.org newbie Name: Filippos Location: Greece Join Date: Nov 2018 Motorcycle(s): Kawasaki Ninja 250R Posts: 3	Good morning DannoXYZ. It dies completely only if the RPMs are low enough. Otherwise its only the gas that becomes unresponsive. The bike does not get any error codes at all. It is both lights flashing (FI and gas), therefore no errors are present, I have plugged it on a laptop. All the recent service jobs were mentioned in my first post. Also, forgot to mention, idle does fluctuate slightly (1300 - 1600) whether the bike is warm or cold. The air filter was replaced as well.