Won't run after jet kit
Having issues getting my new gen to run after some mods. Installed a DJ stage 2 jet kit, Kleen delete, full Area-P exhaust, K&N filter and removed the snorkel. Bike will pop and even shot a flame out the exhaust but won't run. Took the carbs off again to make sure the kit was installed correctly and all seems good: DJ needle with e-clip on 3rd groove, 2 washers above the e-clip, DJ-098 main jet installed and mixture screw 3 turns out. Same problem after re-assembly. I pulled the plugs and they did have some gas on them but didn't look soaked. Any idea on what I'm missing?
|