Quote:
Originally Posted by DannoXYZ
H Adel !! Welcome to Ninjette! 
You can see in photos that rear part of crash-cage bolts to upper hole in frame that allows access to upper shock mounting-bolt. Rear side has nut that attaches from behind. Similar to these decorative covers: https://www.slingshotracing.net/cata...set-p-511.html
 |
Hello, DannoXYZ!.
Thank you very much for your welcome and replaying me back.
Yes, he remove the upper cover and set the rear part of the crash-cage in there. But do you think he use the upper shock bolt to hold the crash-cage By using a longer bolt? Or he Use a plate to hold everything in place( crash- cage, frame and followed by plate and use the bolt to hold everything)
Sorry! Is because I am trying to design my own.
I was thinking on replace the upper shock bolt by a longer one and use spacers, but I am not sure if I want mess with the shock!
A plate in between might work but I feel it will vibrate a lot.
I am wondering how experts in crash cage made them!
Thank you!
Adel