Quote:
Originally Posted by Terraninja
Both primary winding measure 3.2ohm.
The right coil (the side that was firing) secondary winding reads nothing while the left side reads 44.2k which I believe is way over spec.
|
You could try the good coil on the bad cylinder.
These things are simple voltage transformers.
No ohms is a sign of an open coil.
IMHO, there is no reason for the ohms to be higher than spec and even in that case, it cannot be bad: inductance is what matters.
Click on the ignition circuit schematic:
http://faq.ninja250.org/wiki/Wiring_...s_%26_diagrams