ninjette.org - View Single Post

Ghostt · March 3rd, 2015, 02:10 PM

Okay, so to bring us, me especially up to speed here, what have you done so far?, and not?And what your still doing?

Have you serviced the carburetors? If so DoD you set the float height? Idle needle screws? Check for vacuum leaks, checked the condition of vacuum hoses? check to make sure they are all hooked up properly? Check Petcock for proper operation? Etc......

And lastly have there been ANY MODIFICATIONS done to the bike??? Jet kit? Airbox? Etc...... Anything different from the OEM set-up?????

March 3rd, 2015, 02:10 PM	#37
Ghostt in your machine Name: Scott Location: Summer Shade, Ky. Join Date: Oct 2014 Motorcycle(s): 98 Ninja 250/F12 aka ZX-2R "SERENITY", 91 Ninja 500/A5 aka ZX-5R "Phoenix", 84 Honda GL1200A "SIREN" Posts: A lot. Blog Entries: 25 MOTM - Jun '17, May '16, Mar '15	Okay, so to bring us, me especially up to speed here, what have you done so far?, and not?And what your still doing? Have you serviced the carburetors? If so DoD you set the float height? Idle needle screws? Check for vacuum leaks, checked the condition of vacuum hoses? check to make sure they are all hooked up properly? Check Petcock for proper operation? Etc...... And lastly have there been ANY MODIFICATIONS done to the bike??? Jet kit? Airbox? Etc...... Anything different from the OEM set-up????? __________________________________________________ *violente et ignorantia* ZX-2R BLOG *Twitter and Instagram = Ghostt_Scott* *I'm not here to change your mind, just to inform.*