View Single Post
Old June 19th, 2018, 06:33 AM   #17
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Make sure the interlock switches are working.

- kickstand switch: both terminals should have connection when up, 0.0 ohms on your meter
- neutral switch: terminal + chassis-ground should have connection, 0.0 ohms on your meter

Next is tracing power-circuit to starter-solenoid starting from battery to ignition-switch to kill switch to start-button.

Last futzed with by DannoXYZ; June 30th, 2018 at 01:31 PM.
DannoXYZ is offline   Reply With Quote