View Single Post
Old July 16th, 2019, 08:06 AM   #8
jdnightfox
sanic speed
 
Name: JD
Location: CA
Join Date: Apr 2017

Motorcycle(s): 250R

Posts: 22
Quote:
Originally Posted by jkv45 View Post
It also sounds like the clutch plates are sticking. I had a Ninja that liked to do that as well. I would either rock it in gear before starting to break it loose or hold the front brake when I hit the button and it would break free.

What oil are you using? Did the issue start after the oil change?

As noted, check the adjustment of the clutch cable - https://faq.ninja250.org/wiki/Adjust...e_clutch_cable

You might want to check the condition of your battery also.
The battery is old but still charges up and stays at a good voltage after riding for a bit

It’s the same oil I had previously, 20w-50 full synthetic


It didn’t want to go into first gear when I first tried, I had to rock it a bit and then it finally went down
jdnightfox is offline   Reply With Quote