Craig - The connectors came from Japan and took a week! I also bought a female 2 wire connector that I was going to use to replace the wire wrap I have on the sidestand cable. Then I could unplug my "jumper" and replug to the sidestand, if I need to reinstall the OEM CDI for warranty issues down the road. I also bought a set male/female 2 wire connector to replace the OEM ones on my left rear turn signal (loose connection within the connectors!).Turns out the 2 wire connector for the sidestand is wrong. It's not oval and symetrical like the "white" one in the pictures I posted on crimping. The one in the picture is what I need.
The 8 way connector I received is the correct one for the OEM '08+ wiring harness, so I will be able to install it sometime this weekend.
Ryan - The crimping instructions are from Eastern Beaver and I am going to crimp the seal under the taps, along with soldering the first crimp (toward the tip).
|