ninjette.org - View Single Post

krolinked · January 11th, 2013, 11:01 PM

So I've tried to get an easier pull on my lever for ninja 250 by replacing stock with an R6 master cylinder. It was almost impossible to squeeze and downright dangerous, with very very little lever travel. Im guessing its because the leverage was changed in the wrong direction? Which lever should i get if I Want:

Lever to pull closer to bar, but be easier to pull?

Does this make sense, Im not sure how to explain it.

January 11th, 2013, 11:01 PM	#1
krolinked Nerd Name: Chris Location: Tujunga Join Date: Mar 2012 Motorcycle(s): Ducati Hyperstrada Posts: 672	Which Master Cylinder should i get? So I've tried to get an easier pull on my lever for ninja 250 by replacing stock with an R6 master cylinder. It was almost impossible to squeeze and downright dangerous, with very very little lever travel. Im guessing its because the leverage was changed in the wrong direction? Which lever should i get if I Want: Lever to pull closer to bar, but be easier to pull? Does this make sense, Im not sure how to explain it. __________________________________________________ It doesn't LOOK that steep. But you can go first...