ninjette.org - View Single Post - Fork height after tapered roller steering bearings?

jjmaine · June 10th, 2022, 04:01 PM

I took my front end apart and replaced the steering bearings with the All Balls kit and it never occured to me that I should measure the height of the top triple clamp so that I can put my forks back to the oem height/rake angle.
Can someone with a Ninja 300 and stock steering bearings measure how high your top triple sits above the frame (or some other reference point)? I know my top triple sits a bit higher but not sure exactly how much and I want to get my forks back to the stock fork height.
For those with the All Balls kit, how did you set your fork height after the swap?
Thanks guys!

June 10th, 2022, 04:01 PM	#1
jjmaine ninjette.org member Name: Justin Location: Maine Join Date: Jul 2016 Motorcycle(s): '05 Ninja 250, '16 Ninja 300 Posts: 113	Fork height after tapered roller steering bearings? I took my front end apart and replaced the steering bearings with the All Balls kit and it never occured to me that I should measure the height of the top triple clamp so that I can put my forks back to the oem height/rake angle. Can someone with a Ninja 300 and stock steering bearings measure how high your top triple sits above the frame (or some other reference point)? I know my top triple sits a bit higher but not sure exactly how much and I want to get my forks back to the stock fork height. For those with the All Balls kit, how did you set your fork height after the swap? Thanks guys!