June 11th, 2022, 01:49 PM
|
#6
|
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011
Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C
Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
I have read reports of people having higher front-ends after bearing replacement. I suspect that may be due to really worn-out or really loose bearings beforehand. This may cause some front-end drop compared to stock. In which case, new bearings would raise front end. But only back up to stock levels.
|
|
1 out of 1 members found this post helpful.
|