Quote:
Originally Posted by thedrewski86
THIS is it! What would this look like? I knew it had to be something like that... the relay simply isn't being told to activate. Do I run a jumper wire somewhere/somehow??
|
Quote:
Originally Posted by thedrewski86
Thank you, this is starting to make sense. I'll be checking those three wires to see which one has continuity to the fusebox. This is very helpful.
|
Yeah, there should already be yel wire leaving junction box. Trace it away from junction-box and see where it ends up. It's probably not connected to anything. Or maybe original RR's connector if you still have it.
Easy way is to attach to one of 3 yellow-wire terminals going into RR. Would've been easy in beginning before crimping terminal. If you have extra terminal, you can remove original from connector and crimp both wires to new one.
Or do 3-way knot.
Link to original page on YouTube.