View Single Post
Old November 14th, 2017, 12:16 PM   #9
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Quote:
Originally Posted by Darksik View Post
Jack you got your bike connected like the picture that is showed in this thread?
yes, when I got my bike, I removed the carbs and removed every clamp and hose for cleaning. Then re-assembled using that picture as guide. Every hose has only two ends. Each end has only ONE correct location to install. I connect one end of hose, then the other end. Then next hose, one end at a time.


Quote:
And how i was saying, in the owner's manual picture where appears the air vacuum system, the "T" is connected to one part of the carbs and to the petcock, and in the picture from this thread the "T" is connected in other place.
ah, there’s the problem. There is NO “T” connection going to petcock. You have wrong picture or getting confused somehow.

Take snapshot of owner’s manual and post it here.
DannoXYZ is offline   Reply With Quote