I'll be updating this list fairly often as I get more and more parts cycling through. This post for now is to get the ball rolling, I have pictures of each part I weighed as well that'll get updated in time.
For those that need a conversion -
http://www.metric-conversions.org/
Weight Increase -
GoPro Hero 5 Session (with mounts) -
GoPro Hero 5 (with mounts) -
XT Pro Lap Timer -
Power Commander -
Suspension
Stock Shock -
JRI Shock without res - 3lbs 5.6oz
Ohlins Shock w res 4lbs 10.9oz
Penske Shock w res - 5lbs -
https://www.ninjette.org/forums/show...34&postcount=4
Frame/Fairings/Misc Brackets
Speedometer Cluster and plastic surround - 1lbs 8.4oz
Front Stay - 3lbs 15.35oz
Front left bracket under frame (pic to come) - 5.7oz
Stock Left Rearset -
Stock Right Rearset -
Vortex Rearsets (pair) - 2lbs 6.25oz
Engine/Accessories
Emissions - 1lbs 3.1oz (straps 1.75oz)
Emissions Bracket - 5.1oz
Spears Gas Cap - 1lbs .3oz
Exhaust slip on (minor scuffs from crash) - 8lbs 8.55oz
Header pipe - 4lbs 6.3oz
YTX9-BS OEM Battery
WPS Lightweight Battery - 1lbs 14.8oz
Wheels/Tires/Brakes/Sprockets
Stock Front Wheel - 9lbs 13.8oz
Stock Rear Wheel -
Stock Sprocket Carrier/Cush Drive -
Marchesini Front wheel - 6lbs 8.45oz
Marchesini Rear Wheel - 8lbs 2.6oz
Marchesini Rear Wheel Sprocket Carrier - 1lbs 14.1oz
GaleSpeed Type-GP1S Rim Front 300-17 (28870071) = 3.143kg
GaleSpeed Type-GP1S Rim Rear 400-17 (28870171) = 5.086kg with 40T steel sprocket
Front "BRAKING" Rotor - 2lbs 6oz
Front Stock Rotor - 2lbs 13.9oz
Front Galfer Rotor - 2lbs 3.05oz
Rear Galfer Rotor - 1lbs 11.5oz
Rear Stock Rotor - 1lbs 15.6oz
Rear Spears Lightweight Rotor - 12.3oz
140 Pirelli SC2 - 11lbs .95oz
110 Pirelli SC1 - 8lbs 4.6oz
Spears 415 18t front - 4.1oz
Spears 415 55t rear - 9.1oz
Spears 415 54t rear - 9.15oz
Spears 415 53t rear - 8.6oz
Spears 415 52t rear - 8.2oz
Spears 415 51t rear -
Driven Front 15t
Stock front 14t
Vortex Rear 43t
Vortex Rear 44t
Vortex Rear 45t
I have quite a bit more to add but out of time for this morning. If you have anything to add please send me a message of the weight of the part with a picture if possible. It will help keep some of the clutter out of the thread.
Thanks!