ninjette.org - View Single Post - Comparing the 250 & 300 motor/engine (Version 2)

garth285 · February 18th, 2015, 07:47 PM

Thanks bud, I pulled my 300 rotor and compared it to the 250 tonight, I took a photo of both of them and overlaid the photo on the PC and found the marks are dead on the same between the 250 and 300.

The other thing I did was try to swap the wires on the ignition pickup incase there was a difference there..... tried it, bike wouldnt run and would just misfire.

Thanks for the help!

February 18th, 2015, 07:47 PM	#121
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	Thanks bud, I pulled my 300 rotor and compared it to the 250 tonight, I took a photo of both of them and overlaid the photo on the PC and found the marks are dead on the same between the 250 and 300. The other thing I did was try to swap the wires on the ignition pickup incase there was a difference there..... tried it, bike wouldnt run and would just misfire. Thanks for the help!