ninjette.org - View Single Post

kashun84 · September 17th, 2019, 06:54 AM

I have a 2013 and my low beam has been not work for a while. I have checked the bulb, fuse nth wrong on those and I check voltage on the bulb socket itself. Funny thing is I got 12V only with out the bulb connected. As soon as I have a bulb connected, it dropped to 0V. This make me to think it might be a relay issue. I took out the relay box and put a jumper wire across the relay switch for the low beam (Pin 1 & 3 if refer to the manual at page 16-80) but still act the same. Did anyone experience the same? Thanks in advance.

September 17th, 2019, 06:54 AM	#1
kashun84 ninjette.org member Name: Jason Location: Queens, NYC Join Date: Apr 2010 Motorcycle(s): 2010 Lime Green 250R Posts: 82	Headlight issue I have a 2013 and my low beam has been not work for a while. I have checked the bulb, fuse nth wrong on those and I check voltage on the bulb socket itself. Funny thing is I got 12V only with out the bulb connected. As soon as I have a bulb connected, it dropped to 0V. This make me to think it might be a relay issue. I took out the relay box and put a jumper wire across the relay switch for the low beam (Pin 1 & 3 if refer to the manual at page 16-80) but still act the same. Did anyone experience the same? Thanks in advance.