Piston Rod # 1 And crankpin for no. 1 Piston rod
Notes: This is the one that had up and down play in it before I removed it. The bearings spin easily around the big end cap (see the gap?). I can also mate the two big end cap surfaces together by hand by tightening the nuts unlike piston rod 2.
2013-07-12 16.18.46.jpg
2013-07-12 16.18.38.jpg
2013-07-12 16.18.02.jpg
2013-07-12 16.17.05.jpg
2013-07-12 16.16.07.jpg
2013-07-12 16.15.55.jpg
2013-07-12 15.20.29.jpg
2013-07-12 15.20.58.jpg