ninjette.org - View Single Post

abhijitz · June 12th, 2013, 05:03 PM

Eric - are you referring to the "A" , "B" , "C" , "D" thickness? If so, i scratched my head on it and couldnt figure out what the manual is wanting us to check. The tabs will fit in either of the tooth spacing. The block sizes are different yes .... but what is the manual referring to being narrow & wider?

Ohh and the A,B,C,D,E,F gear marking table is for another reference. check Page 6-9.

All i did was align the U notch (2 on each friction plate) and install them. From the other 2007 DIY Clutch Install, the 2008+ do not have any "horse-shoe" stamping for orientation.

June 12th, 2013, 05:03 PM	#3
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	Eric - are you referring to the "A" , "B" , "C" , "D" thickness? If so, i scratched my head on it and couldnt figure out what the manual is wanting us to check. The tabs will fit in either of the tooth spacing. The block sizes are different yes .... but what is the manual referring to being narrow & wider? Ohh and the A,B,C,D,E,F gear marking table is for another reference. check Page 6-9. All i did was align the U notch (2 on each friction plate) and install them. From the other 2007 DIY Clutch Install, the 2008+ do not have any "horse-shoe" stamping for orientation. __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com