Quote:
Originally Posted by DannoXYZ
Woohoo!!! I have similar set-up on my track-bike. You're really gonna love the transformation!
|
I truly hope for that !
I finished rebuilding both sides today. Now I have to reassemble and align everything.
I measured the travel while the spring was not in the tube and it measured about 115mm with the damping rod spring being unloaded.
So apparently my emergency brake test I did in the fall was bottoming them down.
Stock spacers gave me 18mm preload which is in the middle of what Racetech specifies. I put them in, once I measure the static sag I might adjust them but it seems to be good start.
Even with the tubes being off the bike and trying to load it with both hands I can feel the difference in the spring rate. Not sure if I can easily tell that the emulators are working, though