A few updates, things slowing down as time for solutions and custom parts takes extra thinking.
The forks get custom triples to narrow the spread, we needed to raise the chassis a bit for ground clearance. Forks are to the top and custom dogbones took care of that.
You can see the modified radiator and the extended filler neck, eliminating the stock rad cap/thermostat housing meant the cap needed to be made the highest point.
We will need to do some figuring on having the chain clear the swingarm, but it may be fine with the larger rear sprocket. That is only a 41T and we will probably put a 46T on it. If need be we may even consider a 17/48T, but hopefully not.
