ninjette.org - View Single Post - Wanted

wardie · December 17th, 2019, 08:58 PM

I removed the seat on my 12' had friend make a template of flat mid steel to match the underside of the rear seat. I used weld nuts to go through frame and secure the plate. Then I drilled and mounted the securing plate for my 32 liter Givi case.

When I do an overnighter I just remove the Givi case take it to my room.
When not in use I remove plate and reinstall my seat.

December 17th, 2019, 08:58 PM	#16
wardie ninjette.org guru Name: Larry Location: Youngstown, Ohio Join Date: Oct 2011 Motorcycle(s): 06 KLR 650,12 250 Ninja, 86 DR 125, 07 CRF 100, 09 Tomos Streetmate LEL Record Holder, 88 K100 RT Posts: 434	rear top case I removed the seat on my 12' had friend make a template of flat mid steel to match the underside of the rear seat. I used weld nuts to go through frame and secure the plate. Then I drilled and mounted the securing plate for my 32 liter Givi case. When I do an overnighter I just remove the Givi case take it to my room. When not in use I remove plate and reinstall my seat. __________________________________________________ wardie