ninjette.org - View Single Post - Anyone have any luck installing China made Digital Speedometer?

95PGTTech · May 27th, 2019, 02:46 PM

Just fabricated a speedo bracket and hooked it up, works as advertised. Measure circumference of FRONT tire and convert to mm (1854 for me). Use youtube videos to figure out how to navigate the menu to program this (it's like a speedo healer). "C1854." I will verify with GPS, with all other bikes speedo healers I just get 65mph to be correct GPS verified and then the rest is what it is, 25mph is usually 1-2mph off.

I am currently connected to black wire ignition from the stock harness and (use videos again) have P=1 on the main screen then PULSE= 1. When I have the bike running I will report back how this works. This gauge can switch between PNP and NPN.

May 27th, 2019, 02:46 PM	#7
95PGTTech ninjette.org member Name: Chris Location: Bordentown, NJ Join Date: Jun 2015 Motorcycle(s): 2008 Ninja 250R Posts: 102	Just fabricated a speedo bracket and hooked it up, works as advertised. Measure circumference of FRONT tire and convert to mm (1854 for me). Use youtube videos to figure out how to navigate the menu to program this (it's like a speedo healer). "C1854." I will verify with GPS, with all other bikes speedo healers I just get 65mph to be correct GPS verified and then the rest is what it is, 25mph is usually 1-2mph off. I am currently connected to black wire ignition from the stock harness and (use videos again) have P=1 on the main screen then PULSE= 1. When I have the bike running I will report back how this works. This gauge can switch between PNP and NPN.