Quote:
Originally Posted by AchyGrappler
I'm in Oxnard, but I head to Torrance a couple times a year to hit up the Japanese markets. Right now I'm just getting the basics set up while trying to fix the hanging throttle.
As for that, I have done the following:
1) Replaced the spark plugs, carb holders, air box boots
2) disassembled the carbs and ultrasonically cleaned the small parts, cleaned the bodies in a homemade parts washer, complete blow out with a compressor
3) adjusted the valves
4) made numerous tests of mix screw adjustments 1/2 turn at a time
Still hangs. I want to replace all of the hoses on the carbs, but got two screws that won't free up so that I can split the bank.
Kind of stuck on that for now. I really need to fix this issue before continuing on with the race bike preps.
|
Before you put the carbs in an ultrasonic cleaner, did you pound out the plugs to the idle screw under the carbs and remove the idle jet, spring, washer, and o-ring?
There's nothing splitting the bank will do to help the throttle hanging, so don't put a lot of effort into that.