Quote:
Originally Posted by infinitewhiskey
Great thead. Can't wait for the finished product.
The 2-1 R6 exhaust is a direct fit to the EX250J engine?
|
The exhaust actually is not off an R6. It came with the other frame I bought that had the r6 front. After some research, it appears to be a old 2 into 1 exhaust yoshimura made for the ninjas. It fit right into the old exhaust mounts.
something like this:
http://www.ebay.com/itm/KAWASAKI-198...49e438&vxp=mtr
but the previous owner did a nasty weld to have an old can on the headers/mid pipe. I simply cut off that section, hammered on the baffles from an r1 and then sawed off the end to make it smooth again.