|
Instead of rolling the bike outside for photos, I took a few in place. Three show the underside and how it bolts to the frame. It's made from 0.090" thick aluminum road sign material, probably something like 5052-H32, because it took the 90 degree bend at the top without cracking. As you can see, it mounts the tail light and the license plate. The extra wires around the back of the bulb socket are power for the side LEDs. The small wire going through the rubber grommet goes to an LED license plate light. The license plate is mouted with two bolts at the moment. It sits tightly against the plate so it doesn't vibrate and crack. I removed the rear part of the rear fender.
|