ninjette.org - View Single Post

ThrottleGirl · July 4th, 2017, 02:08 PM

I hear ya'. I'm hoping to reduce it all to dual sport blinkers and small LED brake light. Planning on cutting the side fairings just past the water fill reservoir and then leaving the rest open/naked from there on back and heat shrinking the wires along the back of the frame line. But like I said, this is the 'idea' stage, which may change immediately as I am now taking the parts off the rear end to see what I'm working with...and trying to remember to keep breathing... This is a bit unnerving as I am far outside of my comfort zone, but am loving it

.

July 4th, 2017, 02:08 PM	#71
ThrottleGirl ninjette.org member Name: Samantha Location: MOAB, UTAH Join Date: Jun 2017 Motorcycle(s): 1993 Ninja 250R, 2013 Ducati Diavel Dark Stealth, 2005 Honda Rebel Bobber Posts: 73	I hear ya'. I'm hoping to reduce it all to dual sport blinkers and small LED brake light. Planning on cutting the side fairings just past the water fill reservoir and then leaving the rest open/naked from there on back and heat shrinking the wires along the back of the frame line. But like I said, this is the 'idea' stage, which may change immediately as I am now taking the parts off the rear end to see what I'm working with...and trying to remember to keep breathing... This is a bit unnerving as I am far outside of my comfort zone, but am loving it . __________________________________________________ When in doubt, throttle out.