Hey guys, well I have been messing with my 250 turbo kit and have had a issue getting the bike to rev past 10k.... well I removed the turbo charge pipe and put a stock type of map back in and free revved the engine and guess what it got up to 10k in a heart beat but then it took a little while to get to 13,000rpm. So I at least know it want so rev that high...
I am going to start to dig into the engine but hopefully this question can be answered.
I am wondering if the keyway for the crank is in a different position from the 250 to the 300 on the rotor.
Would it be possibly to see if the TDC mark is different between the two?
I would greatly appreciate any help!
|